Cox modem blinking blue

Blinking: It flashes green while the modem router is establishing the internet connection. Off: The modem is Offline. Verify all cable connections and try resetting the modem. 2.4 GHz: On: Light is solid green when broadcasting a 2.4 GHz signal. Blinking: The light blinks when the modem router actively sends or receives data over the network. Off

Cox modem blinking blue. Front View. Click to enlarge. After the cable modem is successfully registered on the network, the Power, Downstream, Upstream, and Online indicators continuously indicate that the cable modem is online and fully operational.. Back View. Click to enlarge. The Motorola MG7700 has the following ports and buttons available on the back of the modem.

The following ports and buttons are found on the back of the modem. Telephone - Connect one or multiple phone lines to the modem using the grey Tel 1 / 2 and Tel 2 ports. Reset - Reboot the modem or reset the modem configuration settings. Use a pointed, non-metallic object to press this recessed button.

The upstream channel is inactive. Verify all cable connections and try resetting the modem. Flashing: Scanning for the upstream channel. Verify all cable connections and try resetting the modem. Solid Green: None. Connection from the Internet to the computer established on one channel: Solid Blue: None. Operating on more than one channel ...This modem (SB8200) indicates that to ensure customer has DOCSIS 3.1 both the UPSTREAM and DOWNSTREAM lights need to be BLUE. However, the only BLUE is the DOWNSTREAM and the UPSTREAM is GREEN. Checking with ARRIS, I was able to get a hold of an agent in which we 3 way called Xfinity to let them know that the …Page 8 MB8611 Lights LIGHT COLOR DESCRIPTION Cable modem power on Green Cable modem power off OFF: Power Green Blinking: Scanning for DS channel Connected on Green 1 downstream channel Green or Blue Negotiating Blue Downstream bonded channel(s) † Blinking: Blue ON: Bonded with 2 or more...The cox router blinking blue light on your device means that the router is resetting, updating, or reconnecting with the internet. Understanding this information will help you diagnose and address any issues that may arise with your router's performance. Step 1: Check The Internet Connection Checking The Internet Signal StrengthThe Motorola MB7621 has the following ports and buttons available on the back of the modem. RESET - Press and hold this recessed button for at least 10 seconds to restore to factory defaults and reboot the modem. ETHERNET - Connects devices to Ethernet ports. COAX - Connects to a coaxial cable. ON / OFF - Turns the modem on and off. Blinking: It flashes green while the modem router is establishing the internet connection. Off: The modem is Offline. Verify all cable connections and try resetting the modem. 2.4 GHz: On: Light is solid green when broadcasting a 2.4 GHz signal. Blinking: The light blinks when the modem router actively sends or receives data over the network. Off The Netgear CG3000D comes configured with wireless security. By default, the Netgear home networking modem supports 802.11n wireless standards and uses WPA / WPA2 wireless security settings. The SSID and Passphrase are printed on the label on the modem. The SSID on the modem is the same as the last six characters of the Wireless MAC address.

Verify all cable connections and try resetting the modem. Solid Green: None. The downstream channel is connected in DOCSIS 3.0 mode. Solid Blue: None. High-speed Internet connection with downstream channels in DOCSIS 3.1 mode. SEND: Off: The upstream channel is inactive. Verify all cable connections and try resetting the modem. FlashingClick to enlarge. The Hitron CODA has the following ports and buttons on the back of the modem. RESET - Insert the end of a paper clip or other small object with a narrow tip into the Reset opening on the back of your CODA modem. To reboot, press and hold the Reset button for 3 to 4 seconds. The CODA resets using your existing settings.By Jack Jenkins December 14, 2022. There are a few reasons why your Cox Panoramic Wifi may be blinking orange. First, it could be because you have an issue with your internet connection. This means there is a problem with either your modem or router and you will need to troubleshoot the issue. Second, your Panoramic Wifi may be blinking orange ...The Netgear CG3000D comes configured with wireless security. By default, the Netgear home networking modem supports 802.11n wireless standards and uses WPA / WPA2 wireless security settings. The SSID and Passphrase are printed on the label on the modem. The SSID on the modem is the same as the last six characters of the Wireless MAC address.Check with your ISP to confirm that this NETGEAR cable modem router is allowed on your ISP's network. ... Blinking blue. The cable modem router is scanning for a ...POWER – a solid green light on the Power LED light indicates that it’s receiving adequate power. If it’s showing a blinking or a solid red light, your router is experiencing a power failure. WLAN – a blinking green light on the WLAN indicator light means that the WLAN interface of your router is active and someone is connected to it ...Here are some of the major reasons why the ethernet port keeps blinking orange light: Your ISP has blocked your internet access. Type of ethernet cable. Slow internet connection. Fiber or ethernet cable is broken. The ethernet port on a wall is not working. The router or modem connection is loose.

When the LED light on your Cox modem/router is blinking blue, it indicates that the modem is in WPS pairing mode. WPS (Wi-Fi Protected Setup) allows easy connection of compatible devices without entering the Wi-Fi password.• If you have Cox phone service and want to use the Gateway for it, insert your phone cord into the TEL 1 port on the back of the Gateway. • For Cox Homelife customers, after your Gateway is installed, please reboot your router by removing the power cord and plugging it back in. Help us send zero waste to landfills byThese two techniques should fix a blinking blue or any other colored light on your router. If this does not resolve your issue, then you may need to contact your router manufacturer for more technical support. What color should the light on my Cox modem be? The Cox modem should have a solid, steady blue light on the top.Step 4: Update Modem Firmware And Drivers. An outdated or corrupted modem firmware and drivers can cause connection problems, including blinking white light. To resolve this issue, update the firmware and drivers of your cox modem. Visit the official website and download the latest version of the firmware and drivers.

Fred meyer lynnwood pharmacy.

Try pushing the WPS button on the Comcast modem to see if it stops the blinking blue light. If your Xfinity device's blue light was flashing because it was in WPS mode, it should disable WPS mode and fix the problem. The location of the WPS button and restart instructions vary slightly depending on which gateway model you have. xFi …Reset My Router • Why does my Cox Cable Box keep blinking?-----Our mission is to create educational content. Therefore, we also explored this topic from...Check with your ISP to confirm that this NETGEAR cable modem router is allowed on your ISP's network. ... Blinking blue. The cable modem router is scanning for a ...Panoramic WiFi router not working. Hello, so about a month and a half ago, we got internet from Cox. It worked perfectly fine up until now. The router light is blinking orange and then green then it goes back to orange and it’s just like an infinite loop. I went and exchanged the router for a new one and it still doesn’t work.The modem is online with DOCSIS 3.0. Blue: None. The modem is online with DOCSIS 3.1. Blinking: None. The modem is trying to go online. Verify all cable …

Once you’ve opened the browser, try to go to www.motorola.com . This should bring you to the service provider’s activation page. Page 6 1 (855) 707-7328 WOW! 1 (800) 343-2076 Once your MB7621 is activated either online or by phone, your service provider will provision your MB7621 service.Your Cox WIFI router blinking blue is an indication that it is in the process of establishing a connection to your modem. Typically, the blinking will start as soon as you turn on your …The Ubee DDW366 has the following ports on the back of the WiFi modem. USB - Connects to USB devices such as flash drives, hard disk drives, and printers. ETH 1-4 (Gigabit Ethernet 1-4, known as LAN 1-4) - Four 10/100/1000 auto-sensing RJ-45 ports. Connect devices on your LAN (Local Area Network), such as a computer, hub, or switch, to these ports. Due to noise or interference or more likely the upstream is too high and the modem just can talk that loud. Unplug power, unhook the coax then hook it back up. Make sure it is as tight as you can get it with your fingers. Visually inspect the coax, make sure it is not kinked or chewed by say like an animal. Call back and request tier 2. Sounds like your modem is stuck in activation. The blinking white light means there is something wrong with the connection. I had one customer who got our gigablast and although he could connect to the internet the light was still blinking. It ended up being an old inadequate line from the box into the house.Arris / Surfboard SB6141 Share or Print This Article Details Troubleshooting The lights indicate the current status of your modem. To troubleshoot any connection problems, use the table below. Manufacturer Resources Refer to the following resources for more detailed technical information on the SB6141. Arris SB6141 Quick Start Guide (PDF)Meaning Of Send Light Blinking Blue. Both bands are uploading data (No action is needed) Meaning of Send Light Blinking Green: Only one band is relevant for upload speeds. ISP-specific problems or interference might be the root cause. Restart the device or connect to the ISP as a solution. 5. Online Light.Modem Information. There are two versions of the SBG6580 available. The Arris N300 is a Dual Band Switched WiFi modem. The Motorola N600 is a Dual Band WiFi modem. 8x4 channel bonding with speeds of up to 150 Mbps on a wired connection. Cox recommends a DOCSIS 3.1 modem or gateway. There might not be COX services trough the coax cable and you may require a technician visit. Plus, COX usually lends out refurbished equipment, and that might also be a reason why your network name isn’t appearing. If the router stays blinking orange this usually means the modem/router is not active to receive data from Cox. A blinking blue light on your Cox router typically signifies that the device is in the process of connecting to the internet. However, there can be several reasons why this light is blinking, indicating an issue that needs attention. Let's explore the potential causes and corresponding solutions: Initial Setup:Click to enlarge. The ARRIS SB6190 has the following ports available on the back of the modem. RESET - Reboot the cable modem or reset the cable modem settings. Press the indented Reset button once using the end of a paper clip or other small object with a narrow tip, and then release. To reset back to the factory default settings, press and ...

Flashing: None. Scanning for configuration parameters. LINK: Off: No devices are connected. Verify all cable connections and try resetting the modem. Flashing: None. A single device connected to the Ethernet port transfers data between the computer and the cable modem. Solid Blue: None - connected to 1000 Mbps. Solid Amber: None - …

Click to enlarge. The Netgear WNDR3700 has the following on the back of the device. Power On / Off button. AC power input. Four local (LAN) 10/100/1000 Mbps Ethernet ports for connecting the router to local. computers. One Internet (WAN) 10/100/1000 Mbps Ethernet port for connecting the router to a cable or. DSL modem.Searching for downstream or upstream channels. Verify all cable connections and try resetting the modem if the LED indicator continues to blink. Solid: None. The modem is …Verify all cable connections and try resetting the modem. Solid Green: None. The downstream channel is connected in DOCSIS 3.0 mode. Solid Blue: None. High-speed Internet connection with downstream channels …Step 11. Locate the HFC MAC ID. This will be the third alphanumeric line on the sticker that is on your modem. Contact your ISP tech support and advise them of the issue as well as the steps you have already taken to …What do the lights on my Cox modem mean? The lights on your Cox modem help you determine the status of your connection. The first light is the Power light, which should be lit up green. This indicates that your modem is properly connected to a power source. The second light is the Downstream light, which should be lit up either green or blue.Call back and request tier 2. Sounds like your modem is stuck in activation. The blinking white light means there is something wrong with the connection. I had one customer who got our gigablast and although he could connect to the internet the light was still blinking. It ended up being an old inadequate line from the box into the house.The Technicolor CGM4981 has the following ports and buttons. WPS - Located on the back of the gateway above the telephone ports, this button can be used instead of entering the WiFi password to connect wireless devices that support WPS to the gateway. WPS works only for wireless networks that use passwords encrypted with the WPA Personal or ...Details Troubleshooting The modem lights indicate the current status of your cable modem. To troubleshoot any connection problems, use the table below. Manufacturer Resources For more detailed technical information on the MB8600, use the resources below. Data Sheet (PDF) Quick Start Guide (PDF)If the Cox Panoramic Wi-Fi continues to blink orange, the connection has been lost, and the modem is attempting to establish a new connection. It may take a few minutes for everything to connect properly, but when it does, the modem will flash a bright green light to let you know everything is ready to go.See full list on decortweaks.com

Pm eyefinity login.

Weather destin fl 10 day.

Jun 17, 2023 · Here are the steps to follow: Locate the reset button: This is usually a small, indented button at the back of the router. Use a pointed object: Use a paper clip or pen to press and hold the reset button for about 10 seconds. Wait: The router will restart and all the lights will flash. Once they’re stable, the reset process is complete. The Hitron CDA 30360 Cable Modem is a DOCSIS 3.0 cable modem. After the cable modem is successfully registered on the network, the Power and Status indicators illuminate continuously to indicate that the cable modem is online and fully operational. For more details, refer to the Modem Lights section.Due to noise or interference or more likely the upstream is too high and the modem just can talk that loud. Unplug power, unhook the coax then hook it back up. Make sure it is as tight as you can get it with your fingers. Visually inspect the coax, make sure it is not kinked or chewed by say like an animal. Unplug the power and ethernet cables from the modem or router. Give the modem or router about five minutes to rest. Plug the modem or router back to the power source. Turn the device on and let it reboot. If doing a power cycle has solved the problem, then your modem or router will now stop blinking green. 8.Upstream channel inactive - Verify all cable connections and try resetting the modem. Flashing: Scanning for an upstream channel - Verify all cable connections and try resetting the modem. Solid Green: Connection from the Internet to the computer is established on one channel. Solid Blue: The modem operates on multiple channels (upstream bond ...How to restart a modem, router, or gateway: Step 1: Unplug the power cable from the back of the modem, router, or gateway. Step 2: Wait 60 seconds. Step 3: Plug the power cable back into the back of the modem, router, or gateway. Step 4: Wait for the equipment to reboot.Ethernet: Four one-gigabit ports for RJ-45 network cable connections and one 2.5-gigabit port. Only one port is active at a time. The following information describes the Ethernet port LED lights. Solid green LED: Indicates the Online status is in DOCSIS 3.0 mode. Solid blue LED: Indicates the Online status is in DOCSIS 3.1 mode.See full list on decortweaks.com The Motorola MB7621 has the following ports and buttons available on the back of the modem. RESET - Press and hold this recessed button for at least 10 seconds to restore to factory defaults and reboot the modem. ETHERNET - Connects devices to Ethernet ports. COAX - Connects to a coaxial cable. ON / OFF - Turns the modem on and off. However I did eventually notice that my 2.4GHz and 5 GHz LED lights are both blinking differently that what I remember. In the past sometimes they both blink at the same time when they are sending or receiving data. Sometimes they are both ON. But now they are constantly blinking (the 2.4GHz is green and the 5GHz is blue; the power and …The modem is online with DOCSIS 3.0. Blue: None. The modem is online with DOCSIS 3.1. Blinking: None. The modem is trying to go online. Verify all cable …Check the LED status on the main Deco: if the LED is solid green/white, it means the Wi-Fi has been created already. You can force the Deco app to close and go to the Settings -> Wi-Fi page of the phone to manually connect to the new Wi-Fi network. If the LED is still pulsing blue, please set it up again with a different Wi-Fi name. ….

However, when there are connection issues, one of the first things to check for is a flashing orange light on the modem. This flashing light indicates that ...Click to enlarge. The Motorola MB7220 has the following ports and buttons available on the back of the modem. ON / OFF - Turns the modem on and off. POWER - Connects to the power adapter. RESET - Press and hold this recessed button for at least 10 seconds to restore to factory defaults and reboot the modem. ETHERNET - Connects devices to the 10 ...Send light flashing blue or green: The modem may need to be reset. Also, the modem may be plugged into the wrong outlet. Online light is off: The modem’s MAC address is not registered. Online light is flashing yellow: Same result: the modem is not registered. 2.4 GHz or 5 GHz Lights are Off: There is no device connected to the modem.Jun 17, 2023 · Here are the steps to follow: Locate the reset button: This is usually a small, indented button at the back of the router. Use a pointed object: Use a paper clip or pen to press and hold the reset button for about 10 seconds. Wait: The router will restart and all the lights will flash. Once they’re stable, the reset process is complete. Verify all cable connections and try resetting the modem. Solid Green: None. The downstream channel is connected in DOCSIS 3.0 mode. Solid Blue: None. High-speed Internet connection with downstream channels …A Cox modem reset is a process of rebooting your internet modem in order to reset its configuration. This typically involves turning off your modem for a certain amount of time, then powering it back up. Resetting the modem can resolve various issues with slow internet, dropped connections, and general stability of your internet connection.ARRIS / Surfboard G34 Share or Print This Article Details Troubleshooting The light on the front indicates the gateway status. To troubleshoot any connection problems, use the table below. Manufacturer Resources For more detailed technical information on the G34, refer to the Arris G34 User Guide (PDF). Search for More ArticlesHere are some of the major reasons why the ethernet port keeps blinking orange light: Your ISP has blocked your internet access. Type of ethernet cable. Slow internet connection. Fiber or ethernet cable is broken. The ethernet port on a wall is not working. The router or modem connection is loose.Jan 23, 2021 · 1. WPS Mode. The WPS button is located on top of the device with two dots. Pressing it activates the WPS mode on the Cox modem. With WPS mode, wireless connections are possible without a Wifi password. The modem will continue to flash blue until the device is connected. Cox modem blinking blue, The light on your Cox modem should be a solid blue color. This typically indicates that your modem is connected to Cox and is therefore active. Any other colors such as red, green, yellow, or orange, typically indicate some sort of problem with the connection. If your modem is not a solid blue, you should contact Cox for assistance in resolving ... , Cox has an article onlineindicating all colors that you may see on your modem from time to time, and blue is one of them. The main reasons are explained below. See more, The US corresponds to Upstream, and DS corresponds to Downstream. A solid, non-blinking US/DS light means your modem/router is connected to the internet and can transmit & receive data. During the initial setup, you can see the light blinking while the modem/router connects to the server. Once the connection is established, the light will be ..., What does the LED light indicate on my S33 cable modem? ... Blinking, Downstream/Upstream channel search (unlocked status). Solid, Online status in DOCSIS 3.0 ..., The Ubee DVW326 has the following ports on the back of the WiFi modem. USB - Connects to USB devices such as flash drives, hard disk drives, and printers. ETH 1-4 (Gigabit Ethernet 1-4, known as LAN 1-4) - Four 10/100/1000 auto-sensing RJ-45 ports. Connect devices on your LAN (Local Area Network), such as a computer, hub, or switch, to these …, Panoramic Wifi Blinking Blue . If you have a Panoramic Wifi gateway, you may have noticed that the light on the front of the device is blinking blue. This is normal behavior and indicates that your gateway is in the process of connecting to the internet. If the light stops blinking and remains solid blue, that means your connection is complete., To factory reset your Panoramic Wi-Fi router: Find the reset button on the router. Get a paperclip or something similar and press and hold the reset button with it for 10-20 seconds. The router will restart and will now be restored to factory defaults. Go through the initial setup process for the router and activate it., Nov 30, 2021 · Reason #3: Router Needs a Reboot. If your Cox modem is blinking orange because you have a slow or wonky internet connection, try ‘power cycling’ the wireless router. Simply unplug it from the wall, and let it sit for exactly 60 seconds before plugging it back in again. Once the minute is up, plug your router back in, and wait for the system ... , Click to enlarge. The ARRIS SB6190 has the following ports available on the back of the modem. RESET - Reboot the cable modem or reset the cable modem settings. Press the indented Reset button once using the end of a paper clip or other small object with a narrow tip, and then release. To reset back to the factory default settings, press and ..., Solid Blue: None - multiple downstream channels are in use: Blinking Blue: Negotiating multiple downstream bonded channels. Verify all cable connections and try resetting the modem. Solid Green: None - one downstream channel is in use: Blinking Green: Scanning for downstream channels. Verify all cable connections and try resetting the modem ..., A Cox Panoramic WiFi green blinking light signifies an unstable internet connection due to bonding issues. You can resolve this issue by disconnecting and reconnecting the modem, checking the cords and power outlets, look for splitter problems or an interruption of power, performing a hard reset, updating your Cox modem software, or getting in ..., Details. Panoramic Wifi from Cox is a high speed internet experience designed to meet your needs by offering wall-to-wall WiFi coverage, fast speeds, and support tools to manage your in-home WiFi networks. With eligible equipment, Panoramic Wifi includes Smart Wifi features with the Cox Panoramic Wifi app and Pods., Jul 27, 2023 · A blinking blue light on your Cox router typically signifies that the device is in the process of connecting to the internet. However, there can be several reasons why this light is blinking, indicating an issue that needs attention. Let’s explore the potential causes and corresponding solutions: Initial Setup: , To restart your Cox Wi-Fi modem, simply follow these steps: Step 1. Unplug your modem from the wall, and leave it unplugged for about 3 minutes just to make sure the reset will take effect. *Also unplug the coax cable from the modem. Step 2., If your Cox router is blinking orange, it means that there is a problem with the internet connection. The first thing to do is to check all the cables and connections to make sure they are secure. If everything looks good, then you may need to reset the router. To do this, unplug the power cord from the back of the router and wait 30 seconds., These two techniques should fix a blinking blue or any other colored light on your router. If this does not resolve your issue, then you may need to contact your router manufacturer for more technical support. What color should the light on my Cox modem be? The Cox modem should have a solid, steady blue light on the top., Solid Blue: None - multiple downstream channels are in use: Blinking Blue: Negotiating multiple downstream bonded channels. Verify all cable connections and try resetting the modem. Solid Green: None - one downstream channel is in use: Blinking Green: Scanning for downstream channels. Verify all cable connections and try resetting the modem ..., The modem is online with DOCSIS 3.0. Solid Blue: None. The modem is online with DOCSIS 3.1. Blinking Green: None. The modem is registering a connection. Off: The modem is offline. Verify all cable connections and try resetting the modem. WLAN: Off: WiFi is not enabled. If using WiFi, connect via WiFi using the SSID and password on the bottom of ..., Blue: Blue modem lights can show a firmware update is in progress, the modem is connecting to another device for pairing, a provider has been detected, and …, Blinking Blue: Negotiating a bonded DS (downstream) channel - Verify all cable connections and try resetting the modem. Solid Blue: One or more DS (downstream) channels are bonded: US (Upstream) Off: Establishing a connection from the computer to the Internet - Verify all cable connections and try resetting the modem. Solid: None: Blinking Blue , Verify all cable connections and try resetting the modem. Solid Green: None. The downstream channel is connected in DOCSIS 3.0 mode. Solid Blue: None. High-speed Internet connection with downstream channels …, Why is Cox Modem Blinking Blue?. Panoramic wifi modem blinking white : CoxCommunications 1 Posted by u/Scranton-Strangler11 1 year ago Panoramic wifi modem ..., If the light on the right side of your Cox modem is flashing blue, it might mean your device is on WPS mode, or it might be picking up either upstream or downstream channels. In this case, it's losing its channels. Whether you just bought the modem or you've owned it for a while, a blinking blue light should signal you to act., If you’re having issues with your Cox Panoramic Wifi, try turning off your modem/router and wait about 5 minutes. Then turn it back on and see if it works. If it doesn’t, contact your internet service provider ISP. Why is my panoramic WIFI flashing blue? Cox Panoramic Wifi is a great feature to have in your home., Click to enlarge. The Arris / Surfboard SB6183 has the following ports available on the back of the modem. ETHERNET - Connects to the Ethernet port on your computer. CABLE - Connects to the cable wall outlet. POWER - Connects the cable modem to the power adapter. , Jul 3, 2023 · The router/modem is on and has a stable connection. Blinking orange and green together indicates that a firmware update is in progress — you should allow it to finish the entire process (during which time, you should not unplug the unit). The blue blinking light indicates that the device is currently in WPS mode. , Battery indicates the status of the battery in the modem and Power indicates whether AC power is available to the unit. Both of these status indicator lights should produce a steady green light. See the table below for statuses indicated by the battery and power lights. For Arris models 508 and 512, contact Cox Communications., Others, like Comcast Xfinity and Cox, prefer that you activate by opening the Web browser of a computer that’s plugged into the MB8611’s Ethernet port. ... Blue Blinking: channel(s) ... • If the modem’s lights don’t come on, check that the modem is getting power from its power cube and that the modem’s, Solid Blue: None - multiple downstream channels are in use: Blinking Blue: Negotiating multiple downstream bonded channels. Verify all cable connections and try resetting the modem. Solid Green: None - one downstream channel is in use: Blinking Green: Scanning for downstream channels. Verify all cable connections and try resetting the modem ... , Step 11. Locate the HFC MAC ID. This will be the third alphanumeric line on the sticker that is on your modem. Contact your ISP tech support and advise them of the issue as well as the steps you have already taken to …, Solid Blue: None - multiple downstream channels are in use: Blinking Blue: Negotiating multiple downstream bonded channels. Verify all cable connections and try resetting the modem. Solid Green: None - one downstream channel is in use: Blinking Green: Scanning for downstream channels. Verify all cable connections and try resetting the modem ..., I recently purchased an MB8600 to replace my previous modem that stopped working. I noticed that the blue downstream light on the MB8600 always starts blinking shortly (hours) after each restart. By that I mean with each restart, the connection is established fine, and all lights are solid., Solid Blue: None - the modem is online in DOCSIS 3.0 mode: Solid Green: None - the modem is online in DOCSIS 2.0 mode: Blinking Blue: None - the modem is registering a connection: Off: The modem is offline: Link: Solid Blue: None - a device is connected using a 100/1000 connection: Blinking Blue: None - data is being transferred over the ...